Synthesis and characterization of SrFeOx hetero-film resistance-switching device with low operation voltage

As a critical topological phase transition material, SrFeO_x could play an essential role in the field of resistive memory. How to implement resistance-switching more softly and ensure the stability of materials has always been a relevant research hotspot. Regulating the oxygen environment during the deposition process of the films can effectively control the stoichiometry of the functional layer and then improve the resistance-switching characteristics of the device. In this paper, a SrFeO_x hetero-film was prepared by oxygen pretreatment on the SrRuO₃ surface before SrFeO_x deposition, and the as-assembled micrometer-scale device exhibits a low set operating voltage of 0.6 V and favorable cycling characteristics. The SrFeO_x hetero-film reveals a vertical brownmillerite superlattice-like structure with ～20 nm perovskite buffer layer, which benefits the connection and rupture of conductive filament. Additionally, XPS and UV–vis were used to analyze the bonding energy and band gap of SrFeO_x hetero-film, and offers the experimental basis for the explanation of the conductive mechanism. Therefore, the device based on SrFeO_x hetero-film with low operation voltage provides a reference for low power consumption research on topological phase transition material.     

碳酸盐岩岩溶储层多井评价方法及地质应用

多井评价是建立在单井精细解释对比分析基础上的预测储层及含油气性平面分布规律的技术方法,而常规测井资料无法区分碳酸盐岩岩溶储层,因而利用多井评价结果确定岩溶发育程度在平面上的分布规律就显得十分重要。为此,在岩心标定成像测井的基础上,对四川盆地高石梯—磨溪地区15口井的成像测井岩溶发育特征进行分析,建立了中二叠统茅口组岩溶发育各分带的标准成像图版,利用交会图及直方图分析各分带的常规测井响应特征,在此基础上形成了电成像测井刻度常规测井识别岩溶发育带的新方法。研究结果表明:①高石梯—磨溪地区茅口组岩溶带自上而下可划分为风化壳残积带、垂直渗流岩溶带、水平潜流岩溶带以及受岩溶作用较弱的基岩;②风化壳残积带在成像测井图像显示为"暗—亮—暗"条带状模式,垂直渗流岩溶带为垂直线状与暗色斑状组合模式,水平潜流岩溶带为水平线状—层状与斑状组合模式,基岩整体显示为亮色块状模式偶见线状或斑状特征;③有效储层主要发育在垂直渗流带和水平潜流带的顶部;④该区茅口组岩溶发育主要受裂缝发育控制,而裂缝发育又与断层关系密切。结论认为,该新方法对碳酸盐岩岩溶储层的多井评价具有普遍适用性,为四川盆地中二叠统风险探井的部署提供了技术支撑。     

AP1000稳压器波动管竖直管段空气-水CCFL实验研究

使用竖直管代替波动管模型开展稳压器波动管竖直管段内空气-水两相逆流限制（CCFL）特性可视化实验研究。实验现象表明:竖直管与上容器接口处的局部CCFL决定了进入竖直管内的液相流量；竖直管内的局部CCFL决定了从竖直管流出的液相流量；两处局部CCFL均随空气流量的增大而增强。在较低气量情况，进入竖直管内的液相能够完全或大部分流出，竖直管内的局部CCFL较弱，上容器和竖直管接口处的局部CCFL在整体CCFL中占主导地位，整体CCFL程度随着上容器液位升高而略有增强。在高气量情况，从上容器进入竖直管的液相大部分或者完全被限制而不能向下流出，竖直管内的局部CCFL强烈，在整体CCFL中占主导地位，整体CCFL特性不受上容器液位变化的影响。通过实验数据拟合得到了新的稳压器竖直管CCFL模型。稳压器波动管CCFL数据和稳压器竖直管CCFL数据基本重合，表明波动管CCFL主要由CCFL-U决定。      

垂直冲击试验机的研制

为满足简便检测塑料产品抗冲击强度的需求,研制了垂直冲击试验机。对垂直冲击试验机的结构进行了设计,基于力学原理进行了受力计算,并对工作原理与相对基准设定问题进行了分析。介绍了垂直冲击试验机的操作方法,并进行了规格校验。     

Improving performance of high-power indium gallium nitride/gallium nitride-based vertical light-emitting diodes by employing simple n-type electrode pattern

In this work, simple n-type electrode structures were used to enhance the electrical and optical performances of fully packaged commercially mass-produced vertical-geometry light-emitting diodes (VLEDs). The forward bias voltage of the VLED with a Y-pattern electrode increased less rapidly than that of VLEDs with a reference electrode. The VLEDs with the reference and Y-pattern electrodes exhibited forward voltages of 2.93±0.015 and 2.89±0.015 V at 350 mA and 3.77±0.015 and 3.53±0.015 V at 2000 mA, respectively. The VLEDs with the Y-pattern electrode resulted in a higher light output than the VLEDs with the reference electrode with increase in the drive current to 2000 mA. The emission images showed that the VLEDs with the Y-pattern electrode exhibited better current spreading behavior and lower junction temperatures than the VLEDs with the reference electrode. With increase in the current from 350 to 2000 mA, the VLEDs with the Y-pattern electrode experienced a 39.4% reduction in the wall plug efficiency, whereas the VLEDs with the reference electrode suffered from a 43.3% reduction.     

15/25MN立捣卧挤炭素挤压机主机装配攻关

立捣卧挤炭素挤压机采用立式捣固预压,卧式挤压,旋转料室+延长料室结构,旋转料室和延伸料室均采用过盈配合,粗加工后要进行热装,压机整体高度较高,由于厂内不具备现场安装条件,导致装配难度很大,通过工艺和装配攻关,确定合理的安装方案,制作专用工装工具,采取相应措施,保证装配精度符合要求。     

Experimental investigation on bubble growth and detachment characteristics on vertical microelectrode surface under electrode-normal magnetic field in water electrolysis

The effects of current density and electrode-normal magnetic fields on the growth and detachment characteristics of a single bubble on vertical microelectrode surface have been investigated. A high-speed camera was used to capture the bubble evolution behavior and the bubble contact characteristic parameters were extracted and analyzed with OpenCV-Python program. The results reveal that an apparent bubble coalescence behavior occurs at low current densities and can be gradually inhibited with increasing current density. With the increase of current density, the bubble growth rate, departure diameter, working electrode potential and potential fluctuations increase, while the bubble growth time first increases and then decreases continuously. The upper microelectrode surface is more easily covered than the lower microelectrode surface. The whole microelectrode can be completely covered when the current density exceeds a certain limit with and without magnetic fields. The external magnetic fields can obviously promote the bubble detachment behavior within a relatively large current density range.     

Sampling procedure in a willow plantation for estimation of moisture content

Heating value and fuel quality of wood is closely connected to moisture content. In this work the variation of moisture content (MC) of short rotation coppice (SRC) willow shoots is described for five clones during one harvesting season. Subsequently an appropriate sampling procedure minimising labour costs and sampling uncertainty is proposed, where the MC of a single stem section with the length of 10–50 cm corresponds to the mean shoot moisture content (MSMC) with a bias of maximum 11 g kg⁻¹. This bias can be reduced by selecting the stem section according to the particular clone. The average difference in MSMC between the largest and smallest shoot in a stump was 31 g kg⁻¹. This variation is only marginally smaller than the variation found in MC between stumps. The MC of individual stem sections may vary as much as 190 g kg⁻¹ in one shoot. Variation in whole shoot moisture content was primarily influenced by the shoot diameter, but in addition significant effects of clone and shoot age were found.     

单2-支平8井优快钻井技术研究

单2-支平8井是胜利油田第一口大斜度垂向分支水平井,分支井眼的最大井斜达116度,通过优化钻井参数、井眼轨迹以及分支点窗口形态等配套技术使得该井在短短8天的时间内完钻,这对于大斜度分支水平井钻井有一定的指导和借鉴意义。     

Asian dust event observed in Seoul, Korea, during 29-31 May 2008: Analysis of transport and vertical distribution of dust particles from lidar and surface measurements

In this study, we investigate the transport of dust particles, its vertical distribution, and the associated meteorological conditions during an Asian dust event that was observed in Seoul, Korea on May 29-31, 2008. This study analyzes data from ground-based and space-borne 2-wavelength polarization lidars, particulate mass concentrations, and synoptic weather data. Surface meteorological station observations of dust phenomena, dust transport model, and weather maps consistently show that the dust particles were transported from the source regions (Inner Mongolia, Man-Ju, and Ordos areas) to Korea via the northeastern part of China. Network observations of the PM₁₀ concentrations in Korea revealed that a majority of the heavy dust particles traveled across South Korea from the northwest to the southeast direction with a horizontal scale of 250-300 km and a traveling speed of approximately 40 km h^− 1. This extraordinary dust event, in terms of its intensity and timing during the year, occurred due to the blockage of an unusually intensified low-pressure system in the northeastern part of China as well as high-pressure system centered over the Sea of Okhotsk and the Kuril Islands. The low values of the particle depolarization ratio (δ₅₃₂) (≤0.05) and color ratio (CR) during the pre-dust period indicate the presence of spherical, non-dust, and relatively small particles. The mean δ₅₃₂ value was approximately 0.123 ± 0.069 between altitudes of ground ~ 2.8 km, and 0.161 ± 0.049 for near-surface dust layer (ground ~ 1.2 km). This value is quite similar to that obtained during the 3-year SNU-Lidar measurements in Seoul (δ₅₃₂ ~0.136 ± 0.027). The value of δ₅₃₂ during the 2nd multilayered dust episode ranged between 0.081 and 0.120 for near-surface dust layers, and between 0.076 and 0.114 for elevated dust layers. The CALIPSO measurements of β₅₃₂, δ₅₃₂, and CR also revealed the presence of dense dust aerosols along the transport route.